|10000||5.88 %||0.320 €|
Did you find this product at a better price? Contact us
Special washable label for returnable plastic containers with strong adhesive.
The Impinj Monza 4QT chip allows this Tag to be detected very easily by readers, regardless of the orientation in which it is applied. Also available with Monza 4E chip.
- Materials: Printable white PET, resin ribbon recommended
- High performance acrylic adhesive specifically for low surface energy plastics
- Dimensioni: 73 x 8 x 0,2 mm
- Weight: 0,1 g
- Good water resistance, tested 5 hours in 1m deep water (IP68)
- Good, tested 300 cycles with water at 175bar / 80°C
No physical or performance changes in:
- 168h Salt water (salinity 10%) exposure;
- 168h Motor oil exposure;
- 24h NaOH (10%, pH 13) exposure;
- 24h Sulfuric acid (10%, pH 2) exposure.
- 30min Acetone exposure
For more information, refer to the technical data sheet.
- Operative frequency
- Global (860 – 960 MHz)
- TID (Tag Identifier)
- 96 bit
- EPC (Electronic Product Code)
- 128 bit
- User memory
- 512 bit
- Operating Temperature
- From -35°C to +85°C
- Protection Class
- RFID Chip
- Impinj Monza4 QT
- L 73 x W 8 x T 0,2 mm
10 other products in the same category: